23
EN
GL
IS
H
Up to 20 tracks/files can be programmed in the desired order.
1
Press the Source button to select “CD” or “USB”.
If playback has been started, press the Stop (
H
) button to stop
playback.
2
Press the PROGRAM button.
“PROG” blinks on the display.
Audio CD
Program number
Track number
MP3/WMA file
Program number
Folder number
File number
<
To cancel the program mode, press the Stop (
H
) button.
3
(When programming MP3/WMA files)
Press the FOLDER (
°
/
‡
) buttons to select a folder on the
MP3/WMA disc or USB storage device.
<
MP3/WMA files that are not placed in folders are put in the “01”
(root) folder.
4
Press the Skip (
.
/
/
) buttons to select a track/file,
then press the PROGRAM button.
The track/file is programmed, and the program number (“P-01”)
is displayed.
<
Repeat steps
3
and
4
to program more tracks/files.
5
When you have finished selecting track/file numbers,
press the Play/Pause (
G
/
J
) button to start program
playback.
<
After playback of all the programmed tracks/files has finished
or you stop the programmed playback, press the Play/Pause
(
G
/
J
) button to play the program again.
<
You can use Skip (
.
/
/
) button during program playback
to select and play other tracks/files in the program.
<
During programmed playback, the Number buttons do not
work.
Clearing the program
In the stop mode, press the Stop (
H
) button. “PROG” disappears
from the display.
<
In the following cases, the programmed contents will also be
cleared:
Changing the source
Pressing the STANDBY/ON button
Ejecting the disc or disconnecting the USB storage device
Disconnecting the AC power cord
CD/USB Programmed Playback