6
Attaching the dust cover
Hinge
Main unit
Dust cover
1
Insert the hinges completely into the
hinge holders at the left and right ends
of the back of the main unit.
2
Align the tops of the hinges with the
dust cover hinge holders and insert
them.
o
Close the dust cover during playback. Since doing this pre-
vents skipping caused by unintended contact and blocks
external sound pressure, it makes noise less likely to occur.
o
Do not open or close it when a record is playing. Doing so
could, for example, cause the stylus to skip.
o
Keep it closed whenever possible to keep dust out.
Removing the dust cover
Hold both edges of the dust cover and lift it slowly to remove it
along with the hinges from the unit. Then, remove the hinges
from the dust cover.
Dust cover
Opening and closing the dust cover
Open
Opening
Hold the front edge of the dust cover and gently lift it open
completely until it stops.
The dust cover will stay open in this position.
Closing
Gently lower the dust cover until it is closed.
V
Be careful not to pinch your fingers, for
example, when opening and closing the
dust cover.
Basic operation
Playing records
o
Remove the protective cap from the cartridge stylus before
using the turntable.
1
Press the STANDBY/ON button on the
back of the unit to turn it on.
2
Open the dust cover slowly.
V
Be careful not to pinch your hand, for
example, when opening and closing the
dust cover.
3
Place a record on the platter.
When playing a 45 RPM large-hole single record, use the
included adapter.
Names and functions of parts
A
N
T
I – S K A T
I N
G
3
0
A
N
T
I – S K A T
I N
G
3
0
aa
d
e
f
i
h
g
c
b
a
Platter
Place records centered on the platter.
b
Counterweight
c
Tracking force adjustment ring
d
Anti-skating dial
e
Tonearm lifter lever
Use to raise and lower the tonearm.
We recommend using the tonearm lifter lever to avoid
damaging records and styluses, because it is safer and
more certain than using a finger to do so.
f
Tonearm holder
This is a rest for the tonearm. Move the clasp to the right
to release the tonearm before playing a record.
g
Tonearm
h
Rotation speed setting knob
Select the rotation speed indicated on the record to be
played.
Rotation will stop when this is set to 0.
i
Headshell
This is a universal type that allows the cartridge to be
changed easily.
