BLUETOOTH OUTPUT
Connecting to Bluetooth Speakers:
1 - Set up your turntable (With Bluetooth Transmitter) and Bluetooth speakers. Make sure the
turntable and Bluetooth speakers are not too far apart.
2 - Turn the volume knob clockwise to switch on the turntable. The Bluetooth output function will be
activated. The LED light indicator will flash, which means the unit is ready to pair with the
Bluetooth speaker.
3
-
Turn on your Bluetooth speaker and make sure it is available to be connected. The turntable and
Bluetooth speakers will auto-pair and connect (it may take around
10 - 60 seconds depending on
the speaker model). The Indicator light will be blue and stable when connection is successful.
4
- To stop Bluetooth out connection, turn off the unit or turn off the Bluetooth speaker.
Important Note:
• Make sure other Bluetooth devices
are
off
, otherwise they
may affect the connection to speaker.
• Make sure to turn on the Turntable Bluetooth before turning on the Bluetooth speakers.
• In some circumstances the Bluetooth connection may break or disconnect due to signal
interference, moving beyond the maximum connection distance, or having an object move
between both Bluetooth devices. However, your device will usually reconnect again automatically.
• In some cases, the devices may need to be manually reconnected using the Bluetooth device’s
settings.
• If you cannot connect your Bluetooth device, the Bluetooth driver may need to be updated to the
latest version.
MAINTENANCE
REPLACING THE STYLUS
-
Refer to the figures 1-8
PRODUCT CARE
1. It is strongly recommended to clean your records with an anti-static cloth to enjoy the best
sound and ensure they are long lasting.
2. For best playback results, it is recommended to replace your stylus periodically
(approximately every 250 hours).
3. Dust the stylus from time to time using a very soft brush dipped in alcohol
(brushing from back to front of the cartridge)
4. WHEN TRANSPORTING YOUR RECORD PLAYER, DO NOT FORGET TO:
Replace the protective cap on the stylus.
Put the rest clip into the pick-up arm.
5. Only store and operate this turntable in a dry and well-ventilated environment.
6. Do not place naked flame sources, such as lit candles on or near the device.
7. Do not expose the turntable to dripping or splashing water.
PRODUCT SPECIFICATIONS
• Belt Drive Turntable with DC Motor
• 3 Speed Turntable – 33⅓, 45, 78 RPM
• Plays 7”, 10”and 12”records
• Bluetooth Input
• Built-in stereo speakers - 4Ω, 3W x 2
• Line out to connect to amplifier
• Unit dimensions: 379 x 163 x 330mm
• Unit weight: 2.25 kg
• Output power: 7W
