Troubleshooting
Specifications
FM Tuner
Frequency band . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87.5 MHz - 108 MHz
Sensitivity. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (IHF) 12 dB µ
Signal noise ratio. . . . . . . . . . . . . . . . . . . . . . . . . . . . mono: 66 dB or above
stereo: 60 dB or above
AM Tuner
Frequency band . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 522 KHz - 1620 KHz
Sensitivity. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55 dB µ
Signal noise ratio. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 dB or above
General
Power Requirements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AC 230 V , 50 Hz
Power Consumption (nominal). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 W
Dimensions (W x H x D) . . . . . . . . . . . . . . . . . . . . . . . . . 435 x 84 x 331 mm
Weight. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.2 kg
Operating temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +5˚C - +35˚C
Operating humidity. . . . . . . . . . . . . . . . . 5 % - 85 % (no condensation)
Storage temperature. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –10˚C - +55˚C
Accessories
Power cord x 1
FM antenna x 1
AM antenna x 1
Remote control x 1
AAA battery x 2
Warranty card x 1
Owner's manual x 1
Design and specifications are subject to change without notice.
o
Weight and dimensions are approximate.
o
Illustrations may differ slightly from production models.
o
If you experience any problems with the unit, please take a moment
to look through this chart before asking for repairs. If you still have
a problem, contact your dealer or TEAC customer service/technical
support (stated on the back cover).
No power
e
Check the connection to the AC outlet. Check and make sure
the AC source is not a switched outlet and that, if it is, the switch
is turned on. Make sure there is power to the AC outlet by
plugging another item such as a lamp or fan into the outlet.
Remote control doesn't work.
e
Press the POWER button of the main unit to turn it on.
e
If the batteries are dead, change the batteries.
e
Within the specified range of 10m, point the remote control
directly at the unit's front panel.
e
Clear any obstacle between the remote control and the main
unit.
No sound
e
Check the connection to the amplifier.
e
Check the operation of the amplifier.
e
Muting is activated. Press the MUTE button. Select the correct
source.
Cannot listen to any station, or signal is too weak.
e
Make sure the antenna is properly connected.
e
Tune in the station properly.
e
If a TV is near the unit, turn it off.
e
Install the antenna again after relocating it to a better reception
position.
e
An external antenna may be required.
11
ENGLISH
