22
Locking clasp
CFast card
3
Close the recording media slot cover.
Removing CFast cards
1
Open the recording media slot cover on the
bottom center of the side of the unit.
2
Slide the locking clasp to the right of the CFast
card front to unlock the CFast card lock.
3
Press the front of the locking clasp into the
unit.
The CFast card will project forward.
4
Grasp the CFast card with fingers and pull it
out.
6. Basic operation
6-1-4. Handling SDHC cards
Avoid using SD cards that have adapters for microSD
cards or miniSD cards.
ATTENTION
o
This unit cannot record video data to SDHC cards.
o
When recording to an SDHC card, recording will stop
if the size of an analog data file reaches 4 GB.
6-1-5. Insertion and removal
Always put the unit into standby before inserting or
removing an SDHC card.
Never remove an SDHC card when the unit is in use
(including when recording or playing back). Removing a
card could cause recording to fail or recorded data to be
lost, for example. Moreover, doing so could also damage
the unit.
SDHC card insertion
1
Open the recording media slot cover on the
bottom center of the side of the unit.
2
Push the SDHC card all the way into the SDHC
card slot at the bottom of the opening.
o
The SDHC card has a front end that must be
inserted first. Insert the card with the correct ori-
entation. Forcing a card into the card slot could
damage this unit.
o
A clicking sound can be heard when the card is
pushed all the way in.
3
Close the recording media slot cover.
Removing SDHC cards
1
Open the recording media slot cover.
2
Push SDHC card in gently.
The SDHC card will come out part way.
3
Pull the SDHC card out by hand.
4
Close the recording media slot cover.
Summary of Contents for VR-24
Page 1: ...Analog Visual Recorder Owner s Manual Z VR 24 D01255010D...
Page 67: ...67 15 Exterior drawings 260 77 12 5 186 Unit mm...
Page 70: ...70...
Page 71: ...71...
