45
10. SYSTEM settings
10-1. Camera
Camera use
No recording will occur when set to OFF.
o
The resolutions are as follows.
HD: 1280x720
VGA: 640x480
QVGA: 320x240
Exposure mode
Continuous:
Adjustments occur automatically
to always achieve optimal exposure
when record ready or recording.
Once:
Adjustment occurs automatically to
achieve optimal exposure when record
ready or when the camera button on
the Home Screen is touched.
Fixed:
The exposure is not adjusted auto-
matically.
Use the lens focal ratio (f-stop) to
adjust the brightness.
ATTENTION
When the exposure is adjusted, the frame rate might
decrease temporarily.
White balance
Once:
When record ready or when the
white balance button on the
Home Screen is touched, the
white balance is adjusted auto-
matically.
Tungsten (3100K): Use this setting when in an area
lit by light bulbs.
Fluorescent (4200K): Use this setting when in an area
lit by fluorescent lights.
Daylight (5000K):
Use this setting when outdoors
on a clear day.
Cloudy (6500K):
Use this setting when outdoors
on a cloudy day.
ATTENTION
The color temperatures are estimates.
Gain
Standard: Use the standard camera gain.
Bright recording is not possible in dark
areas, but the images are clear with little
noise.
Increased: The camera gain is increased.
The images will be noisier than usual, but
recording that is relatively bright is pos-
sible even in dark areas.
Camera status
This shows the name of the connected model.
ATTENTION
Automatic adjustment will occur after the unit is made
record ready. Adjustment will occur for some time after
the unit is made record ready.
For this reason, if recording is started soon after becom-
ing record ready, the image might be recorded while
being adjusted.
Summary of Contents for VR-24
Page 1: ...Analog Visual Recorder Owner s Manual Z VR 24 D01255010D...
Page 67: ...67 15 Exterior drawings 260 77 12 5 186 Unit mm...
Page 70: ...70...
Page 71: ...71...
