5
1-3. Features
This data recorder assures the synchronization of video
and analog signals and allows their recording.
This standalone data recorder has been designed to be
compact and lightweight in consideration of field use.
(An optional battery unit designed for this recorder is
also available.)
o
One-channel recording is possible when the video
input is HD resolution at 30 fps, and two-channel
high-quality recording is possible when it is VGA reso-
lution at 30 fps.
o
Video signals are input using a gigabit Ethernet
interface.
Cameras can be easily connected to the main unit
using dedicated camera cables for control signals and
power supply.
We have published a list of cameras that have been
connected and tested for operation on our website
(http://datarecorder.jp/en/).
o
Recording is supported for up to four channels of
24-bit analog input in the DC 0 Hz − 40 kHz frequency
range.
A wide dynamic range is realized using 24-bit analog
to digital conversion.
o
Analog input using DC, AC and ICP sensors is supported.
o
For convenience at measurement sites, CAN, GPS and
pulse signal input are supported as standard.
o
CFast cards enable high-capacity data recording
at high transfer rates. Recorded data is easy to use
and multiple cards can be prepared, allowing easy
creation of separate files according to recording pur-
poses, for example.
SD cards can be used for recording when input-
ting only analog signals, making possible the use of
recording media that is easy to obtain.
o
For operation, the unit includes a 5.7-inch color TFT
display with excellent visibility. The graphical inter-
face design enables intuitive operation using the
touchscreen. This also makes it easy to check video
and analog signal recording at measurement sites.
A panel lock function is also included, however, to
prevent misoperation.
o
Numerous and convenient additional functions include
trigger recording starting/stopping.
1. Introduction
o
Synchronized connection of two units is supported,
allowing the number of recording channels to be
increased.
In addition, synchronized connection with our more
advanced products (WX/LX series) is supported,
allowing the number of recording channels for ana-
log signals to be increased greatly.
o
A wide DC power input range (DC 11 V – 17 V) is
supported.
o
The AC adapter, which is an included accessory, sup-
ports universal power supplies. (AC 100 V – 240 V)
Summary of Contents for VR-24
Page 1: ...Analog Visual Recorder Owner s Manual Z VR 24 D01255010D...
Page 67: ...67 15 Exterior drawings 260 77 12 5 186 Unit mm...
Page 70: ...70...
Page 71: ...71...
