EN
27
Volume display
This sets how the volume is shown.
MENU
VOLUME TYPE
STEP (0-100)
STEP (0-100)
This shows the volume in steps from 0 (minimum) to 100
(maximum).
dB
This shows the volume in decibels (dB).
Screen indication
Select the information shown to the right of the playback source.
MENU
DISPLAY TYPE
VOLUME
VOLUME
The volume is shown.
SAMPLING FREQ.
Information about the playback source is shown.
NOTE
This can be set directly with the remote control DISPLAY button.
Automatic power saving function
This unit has an automatic power saving function.
o
The automatic power saving function is ON when the unit is
shipped new from the factory.
MENU
AUTO POWER SAVE
ON
OFF
The automatic power saving function is disabled.
ON
The unit will automatically enter standby mode if no audio is out-
put and no operation is conducted for about 30 minutes.
o
The automatic power saving time setting can be used to change
the amount of time until the unit enters standby mode.
Automatic power saving time setting
This sets the amount of time until the automatic power saving func-
tion causes the unit to enter standby.
MENU
APS TIME SETTING
30 [MIN]
This can be set in a range from 1–255 minutes in 1-minute incre-
ments (30 minutes by default).
PCM signal D/A conversion
DELTA SIGMA Fs
This sets the ΔΣ modulator sampling frequency.
Select the sound setting you prefer.
MENU
DELTA SIGMA Fs
512x Fs
128× Fs
256× Fs
512× Fs
PCM DELTA SIGMA
This sets the ΔΣ modulator output format.
Select the sound setting you prefer.
MENU
PCM DELTA SIGMA
MULTI BIT
MULTI BIT
This outputs using multi level.
DSD (1 BIT)
This outputs using DSD format.
