EN
29
Coaxial digital output
This sets the output from the COAXIAL digital audio output connector.
MENU
COAXIAL OUT
ON
OFF
No audio signal will be output from the COAXIAL digital audio
output connector.
ON
Audio signals will be output from the COAXIAL digital audio out-
put connector.
Optical digital output
This sets the output from the OPTICAL digital audio output connector.
MENU
OPTICAL OUT
ON
OFF
No audio signal will be output from the OPTICAL digital audio
output connector.
ON
Audio signals will be output from the OPTICAL digital audio out-
put connector.
Left-right balance adjustment
Adjust the left-right balance.
MENU
L/R BALANCE
ctr. 0.0dB
This setting can be made for each output.
This can be set from Lch 24.0 dB to Rch 24.0 dB in 0.5dB increments.
When the volume is the same for both left and right channels, “ctr.
0.0dB” will be shown.
Information display
This shows the version of the firmware used by the unit.
MENU
VERSION INFO
SYSTEM
SYSTEM
The microcomputer firmware version
USB
The USB firmware version
FPGA
The FPGA firmware version
CD DRIVE
The CD drive firmware version
