EN
21
3
Press the skip knob (
.
/
/
).
o
You can also press the ENTER button on the remote control.
o
The currently set value is shown on the display.
4
Turn the skip knob (
.
/
/
) to change set-
ting values.
o
You can also use the up and down (
k
,
j
) buttons on the
remote control.
o
Press the MENU button to return to setting item selection.
5
Press the skip knob (
.
/
/
).
o
You can also press the ENTER button on the remote control.
6
When you are done changing settings, press
the MENU button to show the status again.
o
If you do not do anything for about seven seconds, the dis-
play will return to showing the status.
Clock sync
MENU
CLOCK SYNC
OFF
OFF
No clock sync is used.
ON
This unit’s master clock will be synchronized to the 10MHz clock
input through the CLOCK sync input (10MHz IN) connector.
Display brightness
MENU
DIMMER
Slightly BRIGHT
BRIGHT
Stays lit brightly.
Slightly BRIGHT
Stays lit dimly.
DARK
Stays dark.
AUTO OFF
Turns off automatically.
o
The display turns off when not being operated.
NOTE
This can be set directly with the remote control DIMMER button.
