5. Pairing the BRC and SMR
The data interchange between BRC and SMR of the WAP-4500 is realized by a
data radio transmission system. Benefits of the radio transmission are the definite
identification between the connected partners and the transmission by radio signals,
which do not require visible connection between transmitter and receiver. BRC and
SMR can both transmit and receive data. You may even control your WAP-4500
from a neighbour room, if you placed your speakers there.
After first power on, the BRC shows a “pairing” screen. This screen appears when
there is no known connection between BRC and SMR or in case you call it to add
another new connection (refer item
7.1 Multiroom operation
).
Place your BRC close to your SMR (< 1m). Select “Pair” to start the pairing
procedure. BRC and SMR communicate to find a suitable connection. The
procedure takes apprx one minute. In case the BRC found more than one WAP
SMR base station, select your WAP-4500 SMR by the scrollbar and confirm your
selection by short pressing the right softbutton
(4)
or the
OK
button
(7)
.
Now you will be back to the main menu which displays the name of the selected
SMR device at the head of the menu list.
Note
: In case you have more than one WAP device in your environment, the
wireless radio system ensures only the one paired SMR is controlled by the paired
BRC at a time!
9
Summary of Contents for WAP-4500
