13
Owner’s Manual
DR-750 Receiver for Wireless Microphone
TITAN COMPONENTS & OPERATION
One or Two receiver modules can be installed in the Titan. Each receiver has 96
selectable channels to assure interference-free operation and is equipped with
a diversity antenna for added sensitivity.
Operation
1.
Turn receiver “on”, turning volume/power switch clockwise.
2.
The LCD screen will display “ON” then revert to factory default channel or
the channel last selected.
3.
To select or change channel, press the “SET” button. LCD display will start
flashing.
4.
Using the UP/DOWN arrow buttons set the receiver to desired channel or
match transmitter channel.
5.
Press “SET” button and to lock in the channel selected.
6.
Adjust volume to desired level.
7.
Module is now ready to receive signal from a wireless microphone or AirLink
transmitter.
8.
When receiving a transmission signal, the A/B diversity antenna LED will
illuminate “Red/Green”
9.
RX indicator will illuminate “Yellow”, indicating receipt of signal from trans-
mitter.
10.
AF indicator will flash “Green” when receiving an audio signal.
LCD Display: Ch. # or Freq. Readout
RF Reception: Diversity A/B Antenna
Transmission Signal Present Indicator
(Yellow)
Flash-Audio Level Being Received
Channel Set: Lock/Unlock
Channel “Up/Down” Selector
Receiver Module: “on/off”
and Master Gain
1
2
3
4
5
6
7
2
1
3
6
4
7
5
Summary of Contents for PA-849
