4
operate using the cabled microphone
operate using wireless microphone
operate the USB digital player
•
Use a dynamic microphone (no phantom power
available)
•
Plug the microphone into the MIC IN jack
•
Adjust volume with power/mic control while
talking into microphone
•
Turn Wireless Receiver Power/Volume control
(WR) clockwise until click
•
Adjacent LED lights ”Red”
•
Select the frequency to match the transmitter
frequency
• Select Decade: 10–90 (Upper selector switch)
• Select Digit: 0–9 (Lower selector switch)
•
Adjust volume with WR control while talking
into the wireless microphone
•
Turn Aux/MP3 Power Volume control clockwise
until click
•
Adjacent LED lights ”Red”
•
Insert USB 2.0 into Port (MP3 will commence
playing automatically)
•
Adjust volume to desired level (Aux/MP3 con-
trol)
•
Press “PLAY/PAUSE” button (MP3 will stop)
•
Press “PLAY/PAUSE” button again and playing
will resume
•
MODE Button: Selects program folders 1,2,3,4
• Initial play will commence in folder 1
• Press MODE button to advance to next folder
•
Press l<< to select file (song) in folder
•
Hold down for fast reverse
•
Press l>> to select file (song) in folder
•
Hold down for fast forward
operating procedure
Turn unit "on": Turn Power/Mic control clockwise until click: Adjacent LED will light “Red”.
Only remove USB 2.0 with
player turned “off ” or in
PAUSE mode
DO NOT REMOVE USB
2.0 WHILE PLAYER IS IN
PLAY MODE
USB format must be either
“FAT” or “FAT 32” (Will
not work with iPod)
caution
note