background image

2

INTRODUCTION

READ FIRST

Thank you for purchasing a Team Corally car. This manual describes the instructions for using the model and the elec-
tronic components. You will also find some tips on how to maintain your RC model so that you can enjoy it for years to 
come. You have purchased one of the most efficient models available on the market that has been designed by a team 
of professionals. You will also benefit from the best after-sales support. All Team Corally models guarantee a high quality 
of manufacture and performance that guarantees you a high satisfaction of use and services provided by the Team 
Corally. Always take the time to read the instructions carefully in order to follow all the procedures to use your RC model 
safely for you and for other people and property in the area. This will allow you to take full advantage of all the perfor-
mance of your RC model.

Please also check the website 

www. corally.com/Downloads/

 to check if you have the latest version of this instruction manu-

al. (Version: see bottom cover of this manual)
If you have any questions about the model and its components, you can send a message to info@corally.com
We also recommend that you get help from an experienced model maker or your dealer.
You will find all the references of the spare parts on the website www.corally.com

TERM OF USE

 

The user is responsible for the use of your model. The user assumes all risks associated with the use of the model. This 
model is not intended for use by children under 14 years of age without the supervision of a responsible adult who is 
familiar with the dangers of using a RC model. Team Corally / JSP Group Intl bvba, its manufacturers, distributors and 
resellers cannot control the use and load of the model and therefore cannot be held responsible for any damage to 
property and damage caused to persons resulting from the use of this product. You must accept these conditions and 
consider yourself fully responsible for the use of this product. If not, do not use this product.

Due to the continuous development of our products, the exact specifications of the kit may vary. If you have a problem 
with your new kit, please contact the store where you purchased it, indicating the part number(s).
Team Corally / JSP Group Intl bvba reserves the right to change any specification without notice. All rights reserved.

This owner’s manual is designed for use with your vehicle and contains the instructions you will need to operate and 
maintain your vehicle.

-  We know you want to start driving immediately after unpacking, but it is very important that you take the time to read 

this manual carefully, even if you are an experienced R/C driver.

-  Read carefully and follow all instructions in this manual. Failure to comply with the instructions will be considered as 

abuse and/or negligence which may result in the cancellation of the warranty.

-  Your vehicle is designed to operate on uneven terrain. However, dust, sand, water and carpet fibres can get into your 

car’s workspaces and can damage your vehicle if they are not removed quickly. We do not guarantee any warranty on 
your vehicle against damage caused by external elements such as sand, dirt or water. Users are responsible for the 
maintenance and safe operation of this vehicle.

- This product is not a toy. It is not suitable for users under 14 years of age, unless they are supervised by adults.

- Never attempt to disassemble electronic components. These have been carefully calibrated at the factory.

-  Only improve your car with parts made for your car. If you upgrade performance, replace the entire system (such as 

the motor, inverter, battery, etc.) so that all components are properly adapted. Any malfunction resulting from a custom 
modification will void your warranty.

-  Before driving your vehicle, please read this manual in its entirety and examine your vehicle and radio control system 

for any defects.

- For better performance, some adjustments may be necessary.

-  This vehicle requires a battery (included in the car or in the packaging). Make sure the vehicle’s battery is sufficiently 

charged before driving, otherwise you may lose control of the vehicle.

- The radio transmitter requires 4 AA batteries (not included)

- Always remove or disconnect the battery from the vehicle to the inverter when not in use.

-  Please drive your car in a spacious place. Never drive your car on the street or in traffic. Public places are subject to 

specific legislation by country, city, municipality, please comply with the legislation for the use of RC models in your 
region.

-  This product is fully assembled in the factory. We accept no liability for damage and/or accidents resulting from custom 

modifications and/or malfunctions.

Summary of Contents for Python C-00181

























Reviews: