English
7
Note: The On/Off operation of the confirmation and On/Off key ( 5 ) is disabled after
the last confirmation. This factory setting has been made to avoid an unwanted
On/Off switching of the unit. The disabling of the On/Off function will be cancelled
after the key ( 5 ) is released once for a short time.
3) LCD illumination
The LC display illumination is switched on at every pressure on any key, and it will be
automatically shut off after 10 seconds.
4) Key lock function
The key lock function is activated from the main screen. The unit can be in PMR
mode or in LPD mode. Depress and hold the confirmation key ( 5 ). While you hold
this key, press also the Up key ( 4 ). Then two short confirmation tones sound
from the speaker ( 6 ), and the key symbol ( position C ) appears in the display.
Now all keys except the PTT key ( 9 ) are ignored. The speaker gives two short tones
at every pressure on any locked key, except the confirmation key ( 5 ).
To stop the key lock function depress and hold the confirmation key ( 5 ). While you
hold this key, press also the Up key s ( 4 ). Then one single short confirmation tone
sounds from the speaker, and the key symbol disappears in the display. Now all keys
are unlocked again.
5) Automatic abortion of functions
If you select a function in the main screen, you have to insert all necessary entries wit-
hin 5 seconds, otherwise the function will be aborted and not executed. Instead the
▼
