Instructions
Using your BS 1001 Barista Scales could not be easier, just follow these simple
steps and your espresso will be perfected in no time.
1. Wake the scales from sleep mode by pressing the
red
button on the
screen module.
2. Place your scales on a flat stable surface.
3. Adjust the tilt of the screen to your desired level.
To use scale:
4. Place the cup or vessel on the scale before beginning your extraction
5. Press the black
button to begin the measurement of mass, you may now
begin brewing your espresso into the cup.
6. On the upper line of the screen the mass/weight in grams will be
displayed.
7. Press the
red
button to reset the device.
To use the timer:
4. When you begin extracting your espresso press the black button to begin
.
the timer counting up.
5. On the lower line of the screen the time since you pressed the black
.
button will be displayed in seconds.
6. Press the
red
button to reset the device.
Please note: pressing the black button will both zero the scale and reset the
timer. If you want to measure the weight of extracted espresso and time the
extraction please follow the instructions for using the timer and place your
vessel for the coffee on the scale before you press the black button.
Parameter
Min
Typ
Max
Units
Supply Voltage
3.156
3.161
3.250
V
Weight
00
-
142
g
Timer
00
-
99
s
Battery life when in use
97
110
121
hours
Current drain
19.7
19,9
20.1
mA
Input Impedance
2.993
2.995
2.997
k
Ω
Specification