13
EN
DBXL-E 2.0 RTR, AVC: 1:5 4WD DESERT BUGGY • INSTRUCTION MANUAL
1.
Fill the shock body 5mm (0.2 in) from the top with 40wt silicone shock oil (TLR74025).
2.
Slowly move the piston up and down 5 times, allowing air to rise to the top. Let the
shock sit for 5 minutes.
3.
With the piston all the way down, fi ll the shock body 1mm (0.04 in) from the top.
Replace the shock cap, spring and spring cup.
1.
Remove the front clip.
2.
Remove the cover and differential.
3.
Check the differential fl uid and refi ll or replace as needed with DYN2656 (30,000CS)
fl uid. The fl uid level should be about 0.12 in (3.0mm) from the
top surface of the case. Do not overfi ll or the differential unit might leak.
4.
Check the ring and pinion as well as the bevel gears in the differential. Replace as
needed. If fl uid is leaking at the drive cups, replace the O-rings. Apply more grease to
the ring and pinion (LOSA99209).
REFILLING/BLEEDING SHOCKS
FRONT DIFFERENTIAL