EN
14
DBXL-E 2.0 RTR, AVC: 1:5 4WD DESERT BUGGY • INSTRUCTION MANUAL
1.
Remove the rear clip.
2.
Remove the cover and differential.
3.
Check the differential fl uid and refi ll or replace as needed with DYN2656 (30,000CS)
fl uid. The fl uid level should be about 0.12 in (3.0mm) from the
top surface of the case. Do not overfi ll or the differential unit might leak.
4.
Check the ring and pinion as well as the bevel gears in the differential. Replace as
needed. If fl uid is leaking at the drive cups, replace the O-rings. Apply more grease to
the ring and pinion (LOSA99209).
REAR DIFFERENTIAL