background image

17

EN

DBXL-E 2.0 RTR, AVC: 1:5 4WD DESERT BUGGY • INSTRUCTION MANUAL

Country of Purchase

Horizon Hobby

Contact Information

Address

United States of America

Horizon Service Center (Repairs and Repair Requests)

servicecenter.horizonhobby.com/RequestForm/

2904 Research Rd. 
Champaign, Illinois, 61822 USA

Horizon Product Support (Product Technical Assistance)

productsupport@horizonhobby.com
877-504-0233

Sales

websales@horizonhobby.com
800-338-4639

European Union

Horizon Technischer Service

service@horizonhobby.eu
+49 (0) 4121 2655 100

Hanskampring 9
D 22885 Barsbüttel, Germany

Sales: Horizon Hobby GmbH

WARRANTY AND SERVICE CONTACT INFORMATION

FCC INFORMATION

FCC ID: BRWDX2EQ2UC and BRWSR6100AT

This device complies with part 15 of the FCC rules. Operation is subject to the following two 
conditions: (1) This device may not cause harmful interference, and (2) this device must accept 
any interference received, including interference that may cause undesired operation.

CAUTION:

 Changes or modifi cations not expressly approved by the party responsible 

for compliance could void the user’s authority to operate the equipment.

This product contains a radio transmitter with wireless technology which has been tested and 
found to be compliant with the applicable regulations governing a radio transmitter in the 
2.400GHz to 2.4835GHz frequency range.

Antenna Separation Distance

When operating your vehicle, please be sure to maintain a separation distance of at least 20 cm 
between your body (excluding fi ngers, hands, wrists, ankles and feet) and the receiver antenna 
to meet RF exposure safety requirements as determined by FCC regulations.

Supplier’s Declaration of Conformity

LOSI DBXL-E 2.0, RTR: 1/5 4WD Buggy (LOS05020)

This device complies with part 15 of the FCC Rules. Operation is subject to the following two 
conditions: (1) This device may not cause harmful interference, and (2) this device must 
accept any interference received, including interference that may cause undesired operation.

CAUTION:

 Changes or modifi cations not expressly approved by the party responsible 

for compliance could void the user’s authority to operate the equipment.

NOTE:

 This equipment has been tested and found to comply with the limits for a Class B digital device, 

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection 
against harmful interference in a residential installation. This equipment generates, uses and can 
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may 
cause harmful interference to radio communications. However, there is no guarantee that interference 
will not occur in a particular installation. If this equipment does cause harmful interference to radio 
or television reception, which can be determined by turning the equipment off and on, the user is 
encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Horizon Hobby, LLC 
2904 Research Rd.,
Champaign, IL 61822
Email: compliance@horizonhobby.com
Web: HorizonHobby.com

EU Compliance Statement: 

Horizon Hobby, LLC hereby declares that this 

product is in compliance with the essential requirements and other relevant 
provisions of the RED and EMC Directives.  

A copy of the EU Declaration of Conformity is available online at:
http://www.horizonhobby.com/content/support-render-compliance.

Transmitter:

Frequency Band: 2405-2478MHz
Max EIRP: 20 dBm

Receiver:

Frequency Band: 2405-2478MHz
Max EIRP: 20 dBm

Instructions for disposal of WEEE by users in the European Union

This product must not be disposed of with other waste. Instead, it is the user’s 
responsibility to dispose of their waste equipment by handing it over to a designated 
collections point for the recycling of waste electrical and electronic equipment. The 
separate collection and recycling of your waste equipment at the time of disposal will 
help to conserve natural resources and ensure that it is recycled in a manner that 
protects human health and the environment. For more information about where you 
can drop off your waste equipment for recycling, please contact your local city offi ce, 

your household waste disposal service or where you purchased the product.

Law

These terms are governed by Illinois law (without regard to confl ict of law principals). This 

warranty gives you specifi c legal rights, and you may also have other rights which vary from state 

to state. Horizon reserves the right to change or modify this warranty at any time without notice.

WARRANTY SERVICES
Questions, Assistance, and Services

Your local hobby store and/or place of purchase cannot provide warranty support or service. 

Once assembly, setup or use of the Product has been started, you must contact your local 

distributor or Horizon directly. This will enable Horizon to better answer your questions and 

service you in the event that you may need any assistance. For questions or assistance, please 

visit our website at www.horizonhobby.com, submit a Product Support Inquiry, or call the toll 

free telephone number referenced in the Warranty and Service Contact Information section to 

speak with a Product Support representative. 

Inspection or Services

If this Product needs to be inspected or serviced and is compliant in the country you live 

and use the Product in, please use the Horizon Online Service Request submission process 

found on our website or call Horizon to obtain a Return Merchandise Authorization (RMA) 

number. Pack the Product securely using a shipping carton. Please note that original boxes 

may be included, but are not designed to withstand the rigors of shipping without additional 

protection. Ship via a carrier that provides tracking and insurance for lost or damaged parcels, 

as Horizon is not responsible for merchandise until it arrives and is accepted at our facility. 

An Online Service Request is available at http://www.horizonhobby.com/content/service-

center_render-service-center. If you do not have internet access, please contact Horizon 

Product Support to obtain a RMA number along with instructions for submitting your product 

for service. When calling Horizon, you will be asked to provide your complete name, street 

address, email address and phone number where you can be reached during business hours. 

When sending product into Horizon, please include your RMA number, a list of the included 

items, and a brief summary of the problem. A copy of your original sales receipt must be 

included for warranty consideration. Be sure your name, address, and RMA number are clearly 

written on the outside of the shipping carton. 

NOTICE: Do not ship Li-Po batteries to Horizon. If you have any issue with a

Li-Po battery, please contact the appropriate Horizon Product Support offi ce.

Warranty Requirements 

For Warranty consideration, you must include your original sales receipt verifying 

the proof-of-purchase date.

 Provided warranty conditions have been met, your Product 

will be serviced or replaced free of charge. Service or replacement decisions are at the sole 

discretion of Horizon.

Non-Warranty Service

Should your service not be covered by warranty, service will be completed and 

payment will be required without notifi cation or estimate of the expense unless 

the expense exceeds 50% of the retail purchase cost.

 By submitting the item for 

service you are agreeing to payment of the service without notifi cation. Service estimates are 

available upon request. You must include this request with your item submitted for service. 

Non-warranty service estimates will be billed a minimum of ½ hour of labor. In addition you 

will be billed for return freight. Horizon accepts money orders and cashier’s checks, as well as 

Visa, MasterCard, American Express, and Discover cards. By submitting any item to Horizon for 

service, you are agreeing to Horizon’s Terms and Conditions found on our website http://www.

horizonhobby.com/content/service-center_render-service-center. 

ATTENTION: Horizon service is limited to Product compliant in the country of 

use and ownership. If received, a non-compliant Product will not be serviced. 

Further, the sender will be responsible for arranging return shipment of the un-

serviced Product, through a carrier of the sender’s choice and at the sender’s 

expense. Horizon will hold non-compliant Product for a period of 60 days from 

notifi cation, after which it will be discarded.

10/15

COMPLIANCE INFORMATION

FOR THE EUROPEAN UNION

IC INFORMATION

IC: 6157A-DX2EQ2UC and 6157A-SR6100AT

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is 
subject to the following two conditions: (1) this device may not cause interference, and (2) 
this device must accept any interference, including interference that may cause undesired 
operation of the device.

Summary of Contents for Desert Buggy XL-E 2.0

































Reviews: