background image

22

Desert buggy xl-e • INstructIoN maNual

ENGLISH

What this Warranty covers

Horizon Hobby, LLC, (Horizon) warrants to the original purchaser that the 

product purchased (the “Product”) will be free from defects in materials and 

workmanship at the date of purchase. 

What is not covered

This warranty is not transferable and does not cover (i) cosmetic damage, (ii) 

damage due to acts of God, accident, misuse, abuse, negligence, commercial use, 

or due to improper use, installation, operation or maintenance, (iii) modification 

of or to any part of the Product, (iv) attempted service by anyone other than 

a Horizon Hobby authorized service center, (v) Product not purchased from an 

authorized Horizon dealer, or (vi) Product not compliant with applicable technical 

regulations or (vii) use that violates any applicable laws, rules, or regulations. 
OTHER THAN THE EXPRESS WARRANTY ABOVE, HORIZON MAKES NO OTHER 

WARRANTY OR REPRESENTATION, AND HEREBY DISCLAIMS ANY AND ALL 

IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED 

WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS 

FOR A PARTICULAR PURPOSE. THE PURCHASER ACKNOWLEDGES THAT THEY 

ALONE HAVE DETERMINED THAT THE PRODUCT WILL SUITABLY MEET THE 

REQUIREMENTS OF THE PURCHASER’S INTENDED USE. 

Purchaser’s Remedy

Horizon’s sole obligation and purchaser’s sole and exclusive remedy shall be 

that Horizon will, at its option, either (i) service, or (ii) replace, any Product 

determined by Horizon to be defective. Horizon reserves the right to inspect 

any and all Product(s) involved in a warranty claim. Service or replacement 

decisions are at the sole discretion of Horizon. Proof of purchase is required 

for all warranty claims. SERVICE OR REPLACEMENT AS PROVIDED UNDER THIS 

WARRANTY IS THE PURCHASER’S SOLE AND EXCLUSIVE REMEDY. 

limitation of liability

HORIZON SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL 

OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRODUCTION OR 

COMMERCIAL LOSS IN ANY WAY, REGARDLESS OF WHETHER SUCH CLAIM IS 

BASED IN CONTRACT, WARRANTY, TORT, NEGLIGENCE, STRICT LIABILITY OR 

ANY OTHER THEORY OF LIABILITY, EVEN IF HORIZON HAS BEEN ADVISED OF 

THE POSSIBILITY OF SUCH DAMAGES. Further, in no event shall the liability of 

Horizon exceed the individual price of the Product on which liability is asserted. 

As Horizon has no control over use, setup, final assembly, modification or misuse, 

no liability shall be assumed nor accepted for any resulting damage or injury. By 

the act of use, setup or assembly, the user accepts all resulting liability. If you 

as the purchaser or user are not prepared to accept the liability associated with 

the use of the Product, purchaser is advised to return the Product immediately in 

new and unused condition to the place of purchase.

law

These terms are governed by Illinois law (without regard to conflict of law 

principals). This warranty gives you specific legal rights, and you may also have 

other rights which vary from state to state. Horizon reserves the right to change 

or modify this warranty at any time without notice.

WARRAnty seRVices

Questions, Assistance, and Services
Your local hobby store and/or place of purchase cannot provide warranty support 

or service. Once assembly, setup or use of the Product has been started, you 

must contact your local distributor or Horizon directly. This will enable Horizon 

to better answer your questions and service you in the event that you may 

need any assistance. For questions or assistance, please visit our website at 

www.horizonhobby.com, submit a Product Support Inquiry, or call the toll free 

telephone number referenced in the Warranty and Service Contact Information 

section to speak with a Product Support representative. 

inspection or services

If this Product needs to be inspected or serviced and is compliant in the country 

you live and use the Product in, please use the Horizon Online Service Request 

submission process found on our website or call Horizon to obtain a Return 

Merchandise Authorization (RMA) number. Pack the Product securely using a 

shipping carton. Please note that original boxes may be included, but are not 

designed to withstand the rigors of shipping without additional protection. Ship 

via a carrier that provides tracking and insurance for lost or damaged parcels, as 

Horizon is not responsible for merchandise until it arrives and is accepted at our 

facility. An Online Service Request is available at http://www.horizonhobby.com/

content/_service-center_render-service-center. If you do not have internet access, 

please contact Horizon Product Support to obtain a RMA number along with 

instructions for submitting your product for service. When calling Horizon, you 

will be asked to provide your complete name, street address, email address and 

phone number where you can be reached during business hours. When sending 

product into Horizon, please include your RMA number, a list of the included 

items, and a brief summary of the problem. A copy of your original sales receipt 

must be included for warranty consideration. Be sure your name, address, and 

RMA number are clearly written on the outside of the shipping carton. 

nOtice: do not ship li-Po batteries to horizon. if you have any 

issue with a li-Po battery, please contact the appropriate horizon 

Product support office.

Warranty Requirements 

For Warranty consideration, you must include your original sales receipt verifying 

the proof-of-purchase date. Provided warranty conditions have been met, your 

Product will be serviced or replaced free of charge. Service or replacement 

decisions are at the sole discretion of Horizon.

non-Warranty service

Should your service not be covered by warranty, service will be completed and 

payment will be required without notification or estimate of the expense unless 

the expense exceeds 50% of the retail purchase cost. By submitting the item 

for service you are agreeing to payment of the service without notification. 

Service estimates are available upon request. You must include this request with 

your item submitted for service. Non-warranty service estimates will be billed 

a minimum of ½ hour of labor. In addition you will be billed for return freight. 

Horizon accepts money orders and cashier’s checks, as well as Visa, MasterCard, 

American Express, and Discover cards. By submitting any item to Horizon for 

service, you are agreeing to Horizon’s Terms and Conditions found on our 

website http://www.horizonhobby.com/content/_service-center_render-service-

center. 

AttentiOn: horizon service is limited to Product compliant in 

the country of use and ownership. if received, a non-compliant 

Product will not be serviced. Further, the sender will be 

responsible for arranging return shipment of the un-serviced 

Product, through a carrier of the sender’s choice and at the 

sender’s expense. horizon will hold non-compliant Product for 

a period of 60 days from notification, after which it will be 

discarded.

10/15

lIMITEd WarraNTy

 

Summary of Contents for Desert Buggy XL-E





































Reviews: