9
Desert buggy xl-e • INstructIoN maNual
ENGLISH
CONTrOl dIrECTION TEST
adjuSTINg STEErINg aNd ThrOTTlE TrIMS
ChaNgINg ThE TraVEl adjuST SETTINgS
steeRing
1. Move the steering wheel Left and Right observing the direction the front
wheels move.
2. If the wheels move the opposite direction, reverse the STR channel.
steeRing tRim
The vehicle should maintain a straight line without any steering wheel input.
If not, adjust the STR Trim knob, so the wheels maintain a straight line without
having to turn the steering wheel.
thROttle
1. Pull the Throttle trigger to move the vehicle forward.
2. If the vehicle moves backward, reverse the THR channel.
thROttle tRim
Trim the vehicle with the wheels off the ground. If the wheels rotate after the
vehicle is powered ON, adjust the TH Trim knob until they stop.
1. Hold the trigger in the full brake position and turn the steering wheel to Full Right while powering on the transmitter. The LED flashes rapidly, indicating the
programming mode is active.
2. throttle end Point:
Continue holding full throttle. Turn the TH TRIM knob to adjust the full throttle end point.
3. Brake end Point:
Hold the trigger in the full brake position. Turn the TH TRIM knob to adjust the full brake end point. Return the trigger to the center position.
4. left steering end Point:
Hold the steering wheel in the full left position. Turn the ST TRIM knob to adjust the left end point.
5. Right steering end Point:
Hold the steering wheel in the full right position. Turn the ST TRIM knob to adjust the right end point. Return the steering wheel to
the center position.
6. Power off the transmitter to save the travel adjust settings. The minimum Travel is 75%, and the Maximum travel is 150%.
imPORtAnt:
If the travel is changed on the DX2E, you must rebind and calibrate the SRS4220.