10
11
®
®
Losi ONLY reccomends the following battery packs be used
in the Speed-T.
Below are four (4) types of configurations that will fit nicely in
your Speed-T.
6-cell side-by-side configuration
LOSB9901 7.2V 4600mAh 6-cell Side-by-Side
7-cell side-by-side configuration
LOSB9902 8.4V 4600mAh 7-cell Side-by-Side
2-cell LiPo (experienced experts only)
LOSB9861 7.4V 5000mAh 2S LiPo
3-cell LiPo (experienced experts only)
LOSB9860 11.1V 3200mAh 3S LiPo
Related accessories (not included) that maybe helpful in the
operation of your Speed-T.
LOSB9613 Losi EC3 Charge Adaptor with Banana Plugs
Installing Batteries:
Transmitter
Remove the battery cover from the bottom of the transmitter by sliding it away from the base of the handle. Install the four (4) AA size
batteries (not included) into the base, noting polarity when inserting each battery.
Transmitter with Batteries
Reinstall the battery cover by sliding it back on the handle base.
LOSB9613 Losi EC3 Charge Adaptor with Banana Plugs
(Required with Losi LiPo Charger LOSB9605)
LOSB9610 Molex (Tamiya) to Losi EC3 Charge Adaptor
LOSB9616 Losi EC3 Connector Set, Male/Female Pair (shown here)
LOSB9615 Losi EC3 Battery Connector Set, Female (2)
LOSB9614 Losi EC3 Battery Connector Set, Male (2)
