9
Inserting film
There is a risk of burning on the safety guard for the heated roller (4)
When inserting or exchanging patch film proceed as follows:
•
Switch off the device and let it cool down
•
Open housing cover
•
When exchanging the film additionally empty carrier rollers (1, 2)
•
Slide the film roll onto the unwinding carrier roller (1) until it reaches the stop limit.
•
Slide an empty film core onto the winding carrier roller (2) until it reaches the stop
limit.
•
Insert the film in accordance with the drawing shown above. Attach the start of the
film to the empty core with adhesive tape.
•
Switch on the device.
•
Transport film with key to the first patch and when doing so check that the film
runs correctly and crease-free.
The first index mark on the film should lie before sensor (3), in order that no patch
is lost.
