TMN-51T Hardware User Guide
15
After all the parameter was set correctly, please go back to main menu and press
„7‟ to save the parameter , then press „9‟ to restart the TMN-51T.
After reboot, and wait for a while without any input, the TMN-51T will go to
Data mode. It will also display all the major configuration info except the ID info
(for secure reason).
After the TMN-51T get the IP address from network, it will display this IP info
before it switch to the working serial port setting (before this, TMN-51T is always
working in the control mode with 115200, 8N1 setting).
