19
User guide -
EN
Returning to the original configuration of the car seat
Follow the instructions below if you wish to return to the harness configuration.
Re-
install the crotch strap, making sure that the metal keeper is correctly in place under
the seat
(26)
. Via the front of the backrest, between the cover and the shell, grasp and
twist the metal anchor of one of the two upper sections of the harness, simultaneously
pulling the section through from the back
(27)
. Thread the harness section through
the side openings of the shell and cover and re-install it via the front of the backrest at
the desired height
(28)
. Check that the metal anchor of the harness section is correctly
positioned behind the backrest
(29)
. Repeat the operation with the second harness sec-
tion. Check the harness is not twisted.
Reclining your child seat
(30)
Storage of the instruction manual
(31)
Maintenance advice
All the material parts can be removed. Slight stains can be removed using a damp
sponge soaked in soapy water or it can be washed by hand at 30° in soapy water. Do
not use bleach, do not iron, do not machine wash, and do not tumble dry.
WARNING
•
This car seat is a “Universal” child restraint system. It has been approved in accordance
with regulation N°44/04, and is suitable for general use in vehicles and is compatible
with the majority (some exceptions) of vehicle seats.
•
It is more likely that the seat is perfectly compatible if the vehicle manufacturer states
that its vehicles are suitable for taking “Universal” child restraint systems.
•
This restraint system is classified as “Universal” in accordance with the strictest ap-
proval criteria, whereas earlier models do not correspond to these new provisions.
•
It can only be adapted to vehicles with 3-point safety belts that are either fixed or have
a roller mechanism and that have been approved compliant with the UN/ECE N° 16 or
other equivalent standards.
•
If in doubt, contact the manufacturer or retailer of the restraint system.
Summary of Contents for L11
