TS-1 Touchscreen Manual
10
Graphics card setup
When using a double-head graphics card, some additional settings must be made within WindowsXP, to make sure both moni-
tors will receive the proper information.
If a Matrox G450/G550 was installed in the PC, WindowsXP will automatically detect this type of card and will install its own set
if graphic drivers. It is also possible to install the original Matrox drivers which came on a CD together with the graphics card.
After installing the drivers, the following settings must be made within WindowsXP:
• Open the „System“ dialog and double-click the „Display“ Icon.
• Select the „Settings“ tab with the two monitor symbols:
• Select monitor 1 and set the recommended resolution to 1024x768 (or higher).
• Select „Advanced“ and „Monitor“ and select the recommended frequency for your monitor.
• Apply the frequency selection with „OK“.
