Use:
Wax iron is used for ironing all types of
waxes onto ski and snowboard bases. The
most effective way of applying a ski wax is
to iron it to a base. Heat of the iron
opens a microporous base of skis and thus
the wax penetrates (seeps) into the
structure of the base and the base absorbs
it perfectly.
Installation:
Plug the iron to a power source. Put the
wax iron into upright position when it is
heating up. Indicator light glows red until
the desired temperature is reached. Then
the light goes off. It takes approximately
5 minutes. Never allow the electrical cord
to come into contact with the heating sole
plate of the wax iron.
All repairs including replacement of the
power cord must be done by a service
centre. Unplug the wax iron before cleaning
it. Wipe the wax iron with a damp cloth and
then wipe dry. Never immerse the wax iron
in water or other liquid.
Summary of Contents for T15
Page 4: ......
