13
The surface of the stove should not be cleaned with scratching and harmful
cleaning material because otherwise the paint surface may be damaged.
6.1 PROBLEM AND CAUSES
Reasons why the stove does not
heat or smoke coming out
Solution
The stove or the stove-pipe let
smokes continuously
Check the chimney efficiency. Clean
your stove and stove pipes on time ( see
the chimney assembly scheme )
The chimney connection of the
stove is leaking
Check the connection. In case of
necessity close the leaking areas with
sealing materials (see chimney
assembly scheme )
The boiler does not reach the
desired temperature
-
Check Fuel Type
-
Chimney emission may be low
-
Check the combustion chamber
for sufficient air supply
The desired temperature is not
reached while the boiler is burning
-
Check the height of the expansion
tank
-
Check plumbing
-
Heat losses are prevented
-
In case of necessity isolation
should be done
There is no fresh air flow from
outside
Ventilate the room more
The water pressure and level in the
system is too low
Check the water pressure ( add water if
necessary )
The stove is overheating
continuously
Check the power and whether the pump
is switched on, use the power supply
The mechanical thermostat is not
set correctly
Set the mechanical thermostat at the
desired temperature
