5
4.1 SAFETY DISTANCES (MINIMUM DISTANCE)
While installing the stove, the fire regulations and chimney’s instructions must be
complied. For any related questions please ask the chimney installer. Minimum
distances to be observed in flammable or heat-sensitive materials (eg furniture,
wallpaper, wood panels) (see diagram below) are:
A
25cm from rear wall
B
15cm from lateral wall and
C
80cm from the radiation area (front side of the product)
Flammable materials and furniture should not be placed at a distance of 80 cm in
the radiation area (C) of the flame monitoring cover.
This distance can be reduced to 40 cm when the protection panel is placed
between the stove and the materials that are likely to burn.
Minimum distances for flammable materials and furniture are indicated on the
product label and must not be exceeded. If the floor where the stove needs to be
installed is flammable or heat-sensitive, you should place the product on the
ground protection plate (eg marble or glass base).
In this case the minimum dimensions of stove bottom plate (look at drawing)
should be:
