Insert the head stem into the head tube. The head
stem can be raised or lowered to suit riders
comfort. Make sure to place the head stem crown
in the correct position before doing this.
Tighten the head stem with a 6 mm allen key. You
can adjust the angle of the head stem with the
6mm allen key on the side if desired too.
Adjust the handlebar head cap such that the
handlebars are at the desired riding angle for riders
comfort.
Attach front mudguard to fork bridge using bolt
supplied. This bolt also holds the front headlight.
Be sure to leave adequate tyre
– mudguard
clearance. This requires a 5 mm allen key.
All manuals and user guides at all-guides.com
