Attach the remaining two screws that hold the
mudguard and ensure they are tight. These are
attached using a 4 mm allen key.
NOTE:
Mount
these on the mounting points halfway up the side of the
fork to avoid clearance issues with the disc brake
assembly.
Insert quick release spindle into the front hub and
adjust in readiness to insert into fork.
Insert into fork and tighten
– this must be tight, but
do not overtighten. An experienced bicycle
mechanic is your best friend here.
Attach both the LEFT and RIGHT pedals using a
15 mm open end / pedal spanner. NOTE: These
are threaded differently and labelled on the end of
the thread as L or R.
Locate the keys which will be hanging from the
cables on the front of the bike.
The battery can be removed by inserting the key
into the lock and twisting clockwise. The battery will
then pop out. Simply pop back in and push to re-
insert battery. It will lock automatically.
All manuals and user guides at all-guides.com
