60
9.2 Network Management Card (Optional)
Network Management Card allow the UPS to communicate with different
types of devices in variety of networking environments. The Online
series has one available communication bay for the following
connectivity cards:
l
Connect UPS- MS Web/SNMP Card
– has SNMP and HTTP
capabilities as well as monitoring through a Web browser interface;
connects to a twisted-pair Ethernet (10/100BaseT) network. In
addition.
l
This series UPS has AS400/Relay card (as optional accessory) for
AS400 communication protocol, or for standard Relay alarm signal.
Please contact your local distributor for details.
9.3 UPS Management Software
Free Software Download – WinPower
WinPower is a new software for UPS monitoring, which provides
user-friendly interface to monitor and control your UPS. This unique
software provides safely auto shutdown for multi-computer systems
while power failure. With this software, users can monitor and control
any UPS on the same LAN no matter how far from the UPSs.
61
Installation procedure:
1. Go to the website:
http://www.ups-software-download.com/
2. Choose the operation system you need and follow the instruction
described on the website to download the software.
3. When downloading all required files from the internet, enter the serial
No:
511C1-01220-0100-478DF2A
to install the software.
When you finish installation, restart your computer, the WinPower
software will appear as a green plug icon located in the system tray, near
the clock.
9.4 REPO Function
The Remote Emergence Power Off interface provides an emergence
power off function. When the REPO function is enabled, once the EPO
port is pulled out, the UPS would shut off the output and enter into EPO
mode, and the UPS would not respond anything command unless the
port is plugged back.
Summary of Contents for AP160N-10K
Page 33: ...62 614 08108 00...
