November, 99
All Rights Reserved
9
B-443 Bar Code Printer
Service Manual
2. SUPPLY SPECIFICATIONS
2.1 Types of Paper
Two types of media are available for B-443: label and ticket.
In B-443, there are two types of sensors for paper: gap sensor and black mark sensor.
Label and ticket can be further classified into direct thermal type or thermal transfer type.
2.2 Specifications
Items
Label
Max.114mm
Paper Width
Min. 25mm
Length (Pitch)
12 ~ 2286mm
Thickness
0.20 mm
Inner roll diameter. Max 4.3” (110mm)
Max. Roll
Diameter
(1” core)
External roll diameter. Max 8.4” (214mm)
Roll Up Method
Print surface wound outside as standard
Paper Core ID.
φ
25.7
±
0.3mm
Note:
(1). The width and thickness quoted above are said of the label plus its backing paper.
(2). Likewise, the approval of label entails that of its backing paper.
(3). In the peel off mode, the minimum pitch is 35mm.
(4). In the cutter mode, it is required the paper be wound outside. Otherwise, paper jam tends to result.
(5). In the cutter mode, the paper thickness is 0.2 mm at maximum, and the paper weight is 100
g/m
2
at maximum.
(6). Paper shape is as shown on next page.
(7)
Tag is 0.2mm in thickness, and is less than 240g/m
2
in weight.
Summary of Contents for B-443
