9. PROGRAM DOWN LOAD
EO18-33011
9.2 INSTALL PROGRAM INSTALLATION
9- 2
9.2.2
Setup
Setup Disk
Make sure that you have all two diskettes available of the “Install Program for B-NX”. (Refer to
the Fig. 8-1 in paragraph 8.2 on the previous page.)
Installation Procedure
(1) While running Windows 95 or Windows 98, insert Setup Disk (1/2) into the PC floppy drive.
(2) Click on the START button then highlight RUN and click on RUN.
(3) When the RUN display appears, as in Fig. 8-2, type in A:\SETUP and click on OK.
(4) When requested, insert Setup Disk (2/2).
(5) After all the files have been copied, the following message screen will automatically appear.
Click on OK to continue.
Fig. 9-2
Fig. 9-3
Fig. 9-4
