6. SYSTEM MODE
EO18-33011
6.10 IP ADDRESS SETTING
6-49
6.10 IP ADDRESS SETTING
!
Outline of the IP Address Setting
In the IP Address Setting mode, you can set the IP Address, Gateway Address, and Subnet Mask
which are necessary for a network communication. Since each setting value is different depending on
your operating environment.
The IP Address Setting menu contains the following:
Press the [PAUSE] key so that the printer enters the Pause condition. Then, press and hold the
[RESTART] key until “<0>RESET” message appears on the display.
Press the [FEED] key 7 times.
The printer is at the start of the IP Address Setting menu.
When “<7>IP ADDRESS” appears, press the [PAUSE] key. “PRINTER IP ADRES” is selected.
Then, press the [PAUSE] key to set the IP address.
Set the first 3 digit value with the [FEED] or [RESTART] key.
NOTES:
1.
Pressing the [FEED] key one time causes a –1 change. Pressing the [RESTART] key
one time causes a +1 change.
2. If holding the [FEED] or [RESTART] key for 0.5 seconds or longer in the parameter
setting, the key is entered continuously.
<0>RESET
<7>IP ADDRESS
192.168.010.020
Printer IP Address Setting
[PAUSE]
[PAUSE]
[PAUSE]
[PAUSE]
Gateway IP Address Setting
Subnet Mask Setting
<7>IP ADDRESS
PRINTER IP ADRES
GATEWAY IP ADRES
SUBNET MASK
[PAUSE]
SOCKET PORT
Socket Port No. Setting
PRINTER IP ADRES
[PAUSE]
