4
WiFi (Create Network)
The DG-1000’s built-in WiFi module can be configured
to create and broadcast a wireless network that can be
connected to directly from a computer or mobile device.
Enable WiFi (Create Network)
1. From the Home screen, touch Settings
2.
Touch Network Configuration
3. Touch WiFi (Create Network)
4. The DG-1000 will begin broadcasting a secured
wireless network with the following settings
SSID:
DG1000-(serial # of gauge)
Password:
dg1000pw
WiFi Network Channel Setting:
1
Select and connect to the DG-1000’s wireless network
on a computer or mobile device. TEC software installed
on the computer or mobile device should now be able to
detect the gauge and create a communication link.
If interference on WiFi Channel 1 is suspected, follow
these steps to broadcast on a different AP Channel
• Select WiFi (Create Network). Then select
Configuration
• Touch AP Channel and enter in a different number
between 1 and 11
Wireless connection options
Wireless connection options continued
CONNECTING A SINGLE DG-1000 QUICK GUIDE
