- 123 -
EO3-11070
MA-1650-4 SERIES
Report
Report Name
Mode for output
Code
3
Financial
*
*
*
*
4
All Individual Cashier
*
*
*
*
5
All Salesperson
*
*
6
Credit Card Company Sales (All Indiv. Companies)
*
*
*
*
8
Department Group
*
*
9
Each Media Sales and In-drawer Total
*
10
Hourly Range
*
*
11
All Department
*
*
*
*
12
All Media Sales and Cash-in-drawer
*
13
All PLU Sales
*
*
*
*
15
All Customer File
*
24
PLU Group
*
*
*
*
X
Z
GTX GTZ
*
: output
Blank: no output
Report Code Table
NOTES:
1. In report takings using a Combination Report Table, only those marked with “*” (output) will be
outputted of all the contained reports in accordance with the mode set at that time.
Example:
When Reports 8 (Department Group), 10 (Hourly Range), and 11 (All Department)
are programmed in a table:
Reports outputted in each mode
X: Department Group, Hourly Range, All Department
Z: Hourly Range, All Department
GTX: Department Group, All Department
GTZ: All Department
2. For designating each Combination Report Table in report takings in X or Z mode, operate as in
the table below:
Combination Report
Daily Reports
GT Reports
Table Output
(Read or Reset)
(Read or Reset)
Table 1
[AT/TL]
200 [AT/TL]
Table 2
1 [AT/TL]
201 [AT/TL]
Table 3
2 [AT/TL]
202 [AT/TL]
3. When changes are made on report combination in a table, entirely or partially, program all the
reports in that table again.
4. An error will result if a Report Code that has already been entered is attempted to enter again in
the same table.
5. In Table No.1, auto-preset report combination of Report 11 (All Depts) and Report 3 (Financial)
is programmed. It will be active as Table No.1 content unless no data are programmed for Table
No.1.
