>> Back Panel
If you notice crackling distortion when using external
effects, either the batteries of the stomp box have run
out, or the send level of the amplifier is too high for the
processor’s input stage. In this case you better connect
the device between bass guitar and amplifier.
The “RETURN / LINE IN” jack (#19a) can also be used
to connect various external audio sources to the PUMA
such as an MP3 player, or in order to just use the power
amp of the PUMA.
The “MASTER” control (#9) determines the final output
level. As the “RETURN / LINE IN” jack (#19a) is placed
after the tone controls (#5 through #8).
19b Send
Connect the “SEND” jack to the input of the (first) exter-
nal device.
20 LINE OUT
This jack provides a line level signal for connection to
a separate power amp, PA mixing console or recording
equipment. The volume of the signal is controlled by the
“MASTER” control (#9). Note that the output is muted
when the “MUTE” function (#10) is engaged.
21 TUNER
This jack is provided for connection to an electronic tuner
and is always “live” even when the PUMA is in “MUTE”
mode (#10). This allows for silent tuning as well as pro-
viding a monitor feed which stays hot even when the
house mix is muted.
11
10
USE ONLY WITH A 250V FUSE
N
E
UTRI
K
EFFECTS LOOP
LINE IN
SEND
RETURN
LINE OUT
TUNER
MIN. LOAD 8 OHMS
EXTERNAL
SPEAKER OUT
Made in Germany
HIGH VOLTAGE! CAUTION: TO PREVENT
THE RISK OF FIRE AND SHOCK HAZARD
DO NOT EXPOSE THIS APPLIANCE TO
MOISTURE OR RAIN. DO NOT OPEN
CASE. NO USER SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
!
Pu
m
a
by
Te
cA
m
p
Bass Combo
VOLTAGE
SELECTOR
230
REHEARSAL
AUX IN
INTERNAL
SPEAKER
ON/OFF
15
14 14a
16
17
18
19b
19a
20
21
>>
Specifications Puma Combo 212 classic
configuration:
2 x 12”
preamp:
solid state preamp with gain, taste, lo, lo-
mid, himid, hi, master controls, switchable
mute, xLR balanced DI out pre/post, serial
effects loop, tuner out, line out, line in
x
output rmS:
500 w
x
power amp:
Class D
x
external Speaker
min. impedance
8 ohms
power consumption:
600 w
DI out:
transformer balanced, pre/post switchable
x
power req:
switchable 115/230 V
x
rehearsal Section:
3,5 mm Aux In/3,5 mm Headphone Out
x
Hf-Driver:
4” Cone-HF- Driver NTM-2
x
Speakers:
2 x 12” TecAmp
W12 S-8 ohms
freq. response:
32 -18.000 Hz.
Dimensions :
(w x h x d)
44 x 75 x 41 cm
17“ x 29,5“ x 16“
Weight:
22,3 kg; 49,1 lbs
optional cover :
x
