2022-01
HYDROFLEX PLUS No. 30199906 Rev. No. 1.1
3
WARNING
CAREFULLY READ AND FOLLOW THE INSTRUCTIONS PROVIDED
IN THIS DOCUMENT BEFORE OPERATING THE INSTRUMENT.
Notice
Every effort has been made to avoid errors in text and diagrams; however,
Tecan Austria GmbH assumes no responsibility for any errors that may appear in
this publication.
It is the policy of Tecan Austria GmbH to improve products as new techniques
and components become available. Tecan Austria GmbH therefore reserves the
right to change specifications at any time with appropriate validation, verification,
and approvals.
We would appreciate any comments on this publication.
Manufacturer
Tecan Austria GmbH
Untersbergstr. 1A
A-5082 Grödig, Austria
T: +43 6246 89330
F: +43 6246 72 770
E-mail: office.austria@tecan.com
Copyright Information
The contents of this document are the property of Tecan Austria GmbH and are
not to be copied, reproduced, or transferred to another person or persons without
our prior written permission.
Copyright
©
Tecan Austria GmbH
All rights reserved.
Printed in Austria.
Declaration for EU Certificate
See the last page of these Instructions for Use.
Intended Use of Instrument
See chapter 2.2.1 HYDROFLEX PLUS Intended Use.
About the Instructions for Use (IFU)
Original instructions. This document describes the HYDROFLEX PLUS, designed
to wash microplates.
It contains instruction for the use of the instrument and is intended as a reference
for the user. It contains information about the following:
1. Installing the instrument
2. Operating the instrument
3. Programming of wash procedures
4. Defining of wash parameters
5. Cleaning and maintenance procedures
