6. Settings Menu
50
HYDROFLEX PLUS No. 30199906 Rev. No. 1.1
2022-01
6.1.2
Options Submenu
The
Options
submenu has the following structure:
EDIT LLD CHANNEL
- + EXIT OK
OPTIONS
< > OK
...*
- + EXIT OK
* Depending on available options
Edit LLD Channel
EDIT LLD CHANNEL
- + EXIT OK
SET WASTE 1
- + EXIT OK
SET VAC. WASTE
- + EXIT OK
SET CHANNEL 1
- + EXIT OK
SET CHANNEL 2
- + EXIT OK
Press OK to continue.
Press OK to activate LLD sensor for Waste 1.
“CLR WASTE 1“ will appear when the sensor is
active. Press OK again to deactivate.
Press + to move to the next sensor.
Press OK to activate LLD sensor for Vacuum
Waste. “CLR VAC. WASTE“ will appear when the
sensor is active. Press OK again to deactivate.
Press + to move to the next sensor.
Press OK to activate LLD sensor for Channel 1.
“CLR CHANNEL 1“ will appear when the sensor is
active. Press OK again to deactivate.
Press + to move to the next sensor.
Press OK to activate LLD sensor for Channel 2.
“CLR CHANNEL 2“ will appear when the sensor is
active. Press OK again to deactivate.
Press + to move to the next sensor.
EDIT PLATES
- + EXIT OK
Press EXIT when all sensors are set as desired.
6.1.3
Bubble Sensor
BUBBLE SENSOR
- + EXIT OK
BUBBLE OFF
- + EXIT OK
Press OK to continue.
Press
– or + to select between
OFF, LOW, MEDIUM and HIGH.
Press OK to confirm.
