8. Maintenance and Cleaning
2022-01
HYDROFLEX PLUS No. 30199906 Rev. No. 1.1
75
8.9.3
Disposal of Operating Material
WARNING
CHEMICAL AND BIOLOGICAL HAZARDS CAN BE ASSOCIATED
WITH THE WASTE MATERIAL (MICROPLATE) OF PROCESSES RUN
ON THE HYDROFLEX PLUS.
TREAT THE USED MICROPLATE, WASTE BOTTLE, PRIME TRAY ON
THE PLATE CARRIER, DISPOSABLES AND ALL SUBSTANCES
USED, IN ACCORDANCE WITH GOOD LABORATORY PRACTICE
GUIDELINES.
INQUIRE ABOUT APPROPRIATE COLLECTING POINTS AND
APPROVED METHODS OF DISPOSAL IN YOUR COUNTRY, STATE
OR REGION.
8.9.4
Disposal of the HYDROFLEX PLUS
Please contact your local Tecan service representative before disposing of the
instrument.
CAUTION
ALWAYS DISINFECT THE INSTRUMENT BEFORE DISPOSAL.
Pollution degree
2 (IEC/EN 61010-1)
Method of Disposal
Contaminated Waste
WARNING
DEPENDING ON THE APPLICATIONS, PARTS OF THE
HYDROFLEX PLUS MAY HAVE BEEN IN CONTACT WITH
BIOHAZARDOUS MATERIAL.
•
MAKE SURE TO TREAT THIS MATERIAL ACCORDING TO THE
APPLICABLE SAFETY STANDARDS AND REGULATIONS.
•
ALWAYS DECONTAMINATE ALL PARTS BEFORE DISPOSAL (I.E.
CLEAN AND DISINFECT).
