6. LSServer, Scanner Shell and Download
6-50
Operating Manual for the LS Series Scanner No. 30001798 Rev. No. 1.5
2004-11
MTP Mode
Select
MTP Mode
for most MTP applications.
Angle is set to 0° (normal incidence) for image scan and 10° for autofocus.
Set Beamshift
Set Beamshift
may be a useful optimization parameter if your sample has only
‘flat‘ walls with a relatively low aspect ratio.
The excitation angle for the image scan can be set to any value between 0° and
25° in 0.1° increments
The angle of incidence for the autofocus scan can be set to any value between
10° and 25° in 0.1° increments
