6. LSServer, Scanner Shell and Download
6-36
Operating Manual for the LS Series Scanner No. 30001798 Rev. No. 1.5
2004-11
Barcode
Select the
Barcode
option button to define the barcode reading position.
The
Geometry Parameters
tab appears as follows:
The
Barcode
window contains the following elements:
Top
spin control
Use the
Top
control or type in a value to set the barcode
reading position (blue line).
The barcode position is centered on the slide and
must be at least 37.5 mm from the bottom line.
The barcode reading position can not be adjusted when
using a barcode bottom reader.
Note
Barcode must be defined in the upper half of the slide
due to limited traveling distances in the y-direction.
Note
If your instrument is equipped with a barcode bottom reader, the
barcode area is fixed. The barcode label has to be placed at the upper
end of the slide. The barcode must cover at least the area about 5mm
away from the upper end.
