5-4
TECEbox 8 cm – Cistern
TE
CEbo
x 8 cm
Cistern 8 cm
The concealed cistern from TECE is a universally adapt-
able 8 cm cistern. By using different frames, the cistern can
be installed in dry or brick-wall constructions. The TECE
cistern is always equipped with the same internal technol-
ogy inside and is therefore compatible with toilet fittings
and all manual TECE flush plates. Due to the cistern's
universal nature, there is a clearly organised range and
storage and the supply of spare parts is straightforward.
Properties of the cistern:
• Pre-assembled and sealed
• Can be combined with all manual TECE flush plates
• Single or dual-flush technology available
• Robust lever mechanism
• 9.5-litre safety tank: enough water when needed
• Compatible with standard market spare parts
• Cistern connection with ½” internal thread
• 6-litre pre-set standard flush volume
• 4.5 / 6 and 9-litre flush volume can be set as an option at
any time,
• 3-litre part-flush with dual-flush system,
• Cistern tank made of impact-resistant plastic and insu-
lated against condensation water
• Easy to install
• Self-explanatory technology
TECE cistern with:
1. Corner valve
2. Reinforced hose
3. Filling valve F 1 with standard connection 3/8“
4. Filling valve holder
5. Drain valve A 3
6. Valve seat of drain valve
7. Reinforcements
Filling valve F 1
Thanks to the high technical quality standard of the filling
system (valve, hose and F1 valve) the TECE cistern is char-
acterised by the lowest sound level on the market -
Lap ≤ 17 dB(A).
Intake and filling valve F 1
Setting the fill level
The fill level in the cistern can be set by turning the adjust-
ment spindle on the filling valve.
The height should be set so that the water reaches the
upper mark on the overflow and the mark on the actuation
block (see figure).
1
2
3
4
5
6
7
