I
UK
D
E
F
NL
P
S
DK
FIN
B
GR
CZ
EE
LV
LT
H
M
PL
SK
SLO
7
Operator's guide
6. CONTROLS
1 Light
switch:
MAKE SURE THAT 1
2.
3.
4
5.
6.
7
8
8. INTERNAL CLEANING
(EVERY 15 DAYS) 1
2.
3
4
5
6.
7
9. REPLACEMENT OF THE INTERNA LIGHT
1
2
3
4.
5
6.
7
10. REPLACEMENT OF THE DOOR'S MAGNETIC GASKET
1
2.
3.
The controls of the appliance are situated at the front inside a protected rectangular recess. .
to switch on the light inside the appliance.
: . The plug is connected.
The refrigeration switch is on (green light lit up).
The
thermometer shows the desired temperature for the foodstuffs to be stored in. . The door is closed.
The appliance is not exposed to the direct light of the sun or high powered lamps.
The room
temperature does not exceed that in wiich the appliance is designed to work normally,i.e.
+30°CU.R.55%, (climatic class 4). . The compressor ventilation grilles are free from obstruction for at
least 30 cm. . The foodstuffs are placed on the shelves in the right way (max 10 kgs for each shelf), in
order to ensure a good circulation of the cool air.
. Switch off electricity supply.
Open the door and remove the displayed foodstuffs,
storing them in another suitably refrigerated site. . Leave the door open and undertake a complete
defrosting. . Take the internal plug out. . Do not use sharp or pointed metal objects to remove the ice
from the evaporator.
Dry everything with care. . Leave the appliance to dry with the door open before
restarting
. Switch off electricity supply. . Unscrew the screws fixing the upper light holder. . Detach the
fluorescent tube from the upper lamp holder.
Remove the tube from the lower lamp holder. . Remove
the transparent protective tube.
Replace the fluorescent tube with an identical one. . Replace
everything parts in reverse order
. Open the door.
Take the magnetic gasket with your hands and remove it from the frame.
Insert
the new gasket and press all around it when in place
2 Refrigeration unit switch:
3 Thermometer:
Thermostat:
4
“
SET
”
5
“
UP
”
6
“
DOWN
”
7. CHECKING THE CORRECT FUNCTIONING BEFORE PLACING THE FOODSTUFF IN
.
to run the refrigeration
system .
to read the temperature inside the appliance.
to adjust the
temperature inside the appliance. In order to adjust the temperature: pushing once the button
the display will show the temperature of the cell, pushing several times the button
the
temperature increases while pushing several times the button
the temperature decreases
(see picture 5).
(see picture 6).
(See picture 7).
(See picture 8).
This appliance is not intended for use by persons (including
children) with reduced physical, sensory or lack. Children should
be supervised to ensure that they do not play with the appliance.
