13
2.
HOME TAB
Home tab displays the main screen with tiles illustrating the current status of particular heating system devices. Tap on the
tile to adjust the operation parameters
:
Screenshot presenting an example tab with main menu parameters
NOTE
„No communication” message means that the communication with the temperature sensor in a given zone has been
interrupted. The most common cause is the flat battery which needs replacing.
Tap on the tile corresponding to a given zone to edit its pre-set temperature:
Screenshot presenting an example setting change
The upper value is the current zone temperature whereas the bottom value is the pre-set temperature.
The pre-set zone temperature depends by default on the weekly schedule settings. Constant temperature mode enables the
user to set a separate pre-set temperature value which will apply in the zone regardless of the time.
