background image

4

SAVE THESE INSTRUCTIONS!

7400 Linder Ave, Skokie, IL 60077

847.410.4400

www.techlighting.com

© 2008 Tech Lighting, L.L.C. All rights reserved. The "Tech Lighting" graphic is 
a registered trademark of Tech Lighting, L.L.C. Tech Lighting reserves the right 
to change specifications for product improvements without notification.

A Generation Brands Company

Summary of Contents for MonoPoint 4

Page 1: ... must be 6 cubic inches 98 cubic centimeter KABLE LITE MONOPOINT CANOPIES Shaping the Hard Wires Bend the hard wires to desired shape with hands Resizing the Hard Wires If necessary cut the hard wires and the clear insulators to the desired length with a sharp cutter Cut 1 4 of the clear insulators on the hard wire where the fixture is going to be connected with a sharp knife NOTE To avoid electri...

Page 2: ...up with the electrical box holes 120 VOLT POWER WIRES LONG 8 32 ROUND HEAD SCREW 4 ROUND CANOPY CEILING ELECTRICAL BOX 12 VOLT TRANSFORMER WIRES 12 VOLT TRANSFORMER WIRES WALL RECTANGULAR CANOPY 6 32 SCREWS Installing the Rectangular Canopy 120 VOLT POWER WIRES Turn the power to the electrical box off In accordance with local electrical codes connect the transformer green wire to the ground Connec...

Page 3: ...lling the Surface Canopy Turn the power to the electrical box off Remove the 4 40 screws on canopy sides to remove the surface dome cover from the backplate Mount the backplate of the surface mount canopy to the electrical box with the two 8 32 round head screws Connect the transformer 120 volt wires to the proper 120 volt power line wires with wire nuts Place all wires and wire nut connections in...

Page 4: ...www techlighting com 2008 Tech Lighting L L C All rights reserved The Tech Lighting graphic is a registered trademark of Tech Lighting L L C Tech Lighting reserves the right to change specifications for product improvements without notification A Generation Brands Company ...

Reviews: