English
- 46 -
Viewing the Connections- Back Connectors
12
1. S/PDIF Digital Out
outputs digital audio signals of the currently watched source.
Use a digital optic cable to transfer audio signals to a device that has S/PDIF input.
2. Subwoofer
Out
is for connecting an external, active subwoofer to the set to give a much
deeper bass effect.
Use an appropriate RCA cable to connect the set to a subwoofer unit.
Audio Line Outs
3.
output audio signals to an external device such as an optional sound
system.
To connect the external speakers to your TV, use
AUDIO LINE OUTS
of the TV with an
audio cable.
4. SCART
2
inputs or outputs for external devices.
5. SCART
1
inputs or outputs for external devices.
Connect the
SCART
cable between
SCART
sockets on TV and
SCART
socket on your
external device (such as a decoder, a VCR or a DVD player).
Note: If an external device is connected via the SCART sockets, the TV will automatically switch to
AV mode. If both sockets are employed at the same time, SCART 1 will override SCART 2 unless
manually selected.
Note: You should connect the decoder to EXT-1, if you are planning to watch a scrambled channel.
The decoder might not function properly if you do not connect the decoder to the Scart 1 (Ext-1) socket
Note: Picture state can be affected by scart cable quality.
6. Component Video Inputs (YPbPr)
are used for connecting component video.
You can connect the component video and audio sockets with a device that has component
output. Connect the component video cables between the
COMPONENT VIDEO INPUTS
on on the TV and the component video outputs of your device. While connecting, be sure
A02_[GB]_SSM_MB35_26855W_1063K_ANALOG_BRONZE2_10062371_50152966.indd 46
08.12.2009 10:24:11
Summary of Contents for TL-26LC855
Page 112: ...50152966 ...
