- 45 -
wish to receive. This organisation will supply
you a corresponding decoder unit to allow the
programmes to be unscrambled.
For further information ask your dealer. See
also the booklet supplied with your decoder.
Connect a decoder with an aerial socket
to the TV
Connect the aerial cable.
Connect a decoder without an aerial
socket to the TV
Connect the decoder to the TV with a Scart
cable to
SCART 1
.
TV And Video Recorder
Connect the aerial cables.
Better picture quality can be obtained if you
also connect a Scart cable to
SCART
sockets.
Playback NTSC
To use this option you can;
Connect an NTSC VCR player to a Scart
socket at the rear side of the TV.
Connect an NTSC VCR player to RCA Jacks
at the side of the TV.
Then, press
$9
button
to select appropriate
source.
Copy Facility
Source selection for
VCR
recording.
Select
Feature
menu.
Select
Ext-2 Out
by pressing
_
/
`
button.
Select a source to copy the picture from that
source.
Search For And Store The Test
Signal Of The Video Recorder
Unplug the aerial cable from the aerial socket
of your video recorder.
Switch on your TV and put the video recorder
on the test signal. (See the booklet for your
video recorder.)
Enter the
Install
menu and select
search
.
Search for the test signal of your video re-
corder in the same way as you searched for
and stored the TV signals. Store the test sig-
nal under programme number 0.
Replace the aerial cable in the aerial socket
of your video recorder once you have stored
the test signal.
Camera And Camcorder
To Connect To AV Input
Connect your camera or camcorder to AV (
EXT-
4
) input at the
right
side of the TV.
Connect your equipment to the TV via
VIDEO
(yellow),
AUDIO R
(red) and
AUDIO L
(white)
inputs. You must connect the jacks to the
input using the same colour.
To Connect To S-VHS Input
Connect your camera or camcorder S-VHS
input
(EXT-4S)
at the
right
side of the TV.
Connect your equipment to the TV via S-VHS
input and audio inputs of AV inputs by using
S-VHS cables.
Connect The Decoder To The
Video Recorder
Some video recorders have a special Scart
socket for decoder.
Connect a Scart cable to the Scart socket of
your decoder and to the special Scart socket
of your video recorder. Refer to the booklet of
your video recorder.
To connect your video recorder to the TV, re-
fer to the TV and Video Recorder section.
If you want to connect more equipment to your
TV, consult your dealer.
Connecting Headphones
Use the stereo headphone socket at the
right
side of the TV, to connect headphones.
Connecting External Equipment
To connect audio amplifiers or home theatre
systems to your TV, use the Audio Line Outs of
the TV.
02-ENG-37735-1072 UK-37 INCH 17MB15 OEM-(WO VGA)(PIP)(S)-50097076.p65
20.11.2006, 19:41
45
Summary of Contents for TL-37LC735
Page 2: ......
Page 30: ... 28 LCDTV FRONT VIEW 3 0 18 79 9 67 1 79 9 0 18 352 5 00 83 2 1 92 80 83 2 1 ...
Page 51: ......
Page 52: ...50097076 ...
