TROUBLE SHOOTING GUIDE ____________________________________
Note: Most problems are directly related to low battery power. So please
verify that the batteries are fully charged and less than two years old.
No Sound
Check for power. Red LED next to power switch.
(Nothing works)
Verify that AC outlet has power.
Verify that the sound system works
Verify dome sensor is receiving power, Green
LED in center of sensor
Body-Pack or Handheld
Check batteries, Green LED when turned “on”
Transmitter does not work
Check microphone cable, wiggle back & forth at
microphone and at connector end.
Verify signal reception from transmitter to
receiver, LED (green) adjacent to volume
control.
Static, Noisy, or fuzzy Sound
Check charge on batteries.
Check Hi / Lo switch inside battery compartment
(Place in “Hi” position)
Along side of battery barrel on handheld
Verify that no other transmitter is turned “on” on
the same channel.
Bright sunlight, high intense fluorescent or
halogen lights near sensor.
Dropouts
Verify that the infrared beam transmitted from
the transmitter (dark red window) is not being
obstructed by clothing or other solid objects.
Dark colored walls have a tendency to absorb
infrared and do not reflect efficiently.
Glass windows and doors allow competing
infrared light which weakens IR transmission.
Persistent dropouts may require installation of an
additional sensor.
Summary of Contents for IRV-268N
Page 1: ......
